Equipment Specification of Aluminium Can Production Line

The working principle of aluminium can production line is roughly the same as that of aluminium tube, while the annealing section, which softens the aluminium can to aluminium tube, is not included.

The information below are only for your reference, we can adjusted the specification according to your requirements.

See technical flowchart

1. Horizontal impact extrusion press(For reference)

nominal pressure 150 Ton length of stroke 312 mm tube diameter ¦Õ 13.5- ¦Õ 38 mm production speed 70-120 cans/min main motor power 11 KW dimensions 3287*1435* 1450 mm net weight 6500 kg

2. Trimming machine(For reference)

can diameter ¦Õ 16- ¦Õ 38 mm can length <220 mm production speed ¡Ü 120cans/min power 4KW inlet pressure 0.4 Mpa net weight 2860 kg dimensions 2060*2660*1820 (mm)

3. Cleaning Machine(For reference)

main power 6.8kw Production speed ¡Ü 120pcs/min heating power 93KW Available can 22mm -55mm Available length ¡Ü 230mm Tube chain total length 76m dimensions 6576* 3554*3750 mm net weight 5200 kg

Annealing Oven (For Aluminium tube production line) (For reference)

production speed 120 can/min can specification ¦Õ 13.5mm - ¦Õ 35mm power 40KW motor power 40KW working temperature 200 -500 ¡æ working time 150 secs dimensions 2820*1260*2955 mm net weight 2200 kg Configuration according to the requirement

4. Internal Coating machine (For reference)

can diameter ¦Õ 13.5- ¦Õ 35 mm can length < 180 mm production speed <120 cans/min air pressure ¡Ý 5.0 kg / cm 2 spray times 3 time power 7kw net weight 3200 kg dimensions 1920*1230*2490 mm

5. Accumulator (For reference)

can diamete ¦Õ 13.5mm - ¦Õ 38mm can length ¡Ü 180mm motor power 1.1kw dimension 3200*1500*4275 net weight 1300kg accumulat tube quantity 1400 tubes

6. Lacquer curing oven (For reference)

production speed 120 tubes/min can specification ¦Õ 13.5mm - ¦Õ 35mm electrothermal power 4KW motor power 70-120 tubes/min working temperature 200 -400 ¡æ working time 240 secs dimensions 3280*1260*2455mm net weight 1950 kg

7. Base-Coating machine (For reference)

can diameter ¦Õ 13.5- ¦Õ 38 mm can length < 180 mm production speed <120 cans/min air pressure ¡Ý 5.0 kg / cm 2 power 1.12kw net weight 4500 kg dimensions 2100*1885*1780 mm

8. Six -color printing machine (For reference)

can diameter ¦Õ 13.5- ¦Õ 38 mm can length 50mm - 180mm production speed <120 cans/min air pressure 0.5Mpa power 8.62kw net weight 5500 kg dimensions 2395*1885*1815 mm

9. Fuel gas oven/ platform (For reference)

can diameter ¦Õ 13.5- ¦Õ 38 mm can length 50mm - 180mm Fuel consumption 100,000 Cal power 0.75kw dimensions 3350*1100*2700 mm

10. Can Capping Machine (For reference)

can diameter ¦Õ 13.5- ¦Õ 38 mm can length 50mm - 180mm production speed <120 cans/min air pressure 0.5Mpa power 0.5kw net weight 3500 kg dimensions 1960*1520*1650 mm

11. Can Latexing Machine (For reference)

can diameter ¦Õ 13.5- ¦Õ 38 mm can length 50mm - 180mm production speed <120 tubes/min air pressure 0.5Mpa power 23kw net weight 900 kg dimensions 1455*1510*1280 mm